Comparative Analysis of Dry, Minimum Quantity Lubrication, and Nano-Reinforced Minimum Quantity Lubrication Environments on the Machining Performance of AZ91D Magnesium Alloy
MACHINES, vol. 13, no. 5, pp. 430–
Berat Baris Buldum, Kamil Leksycki, Suleyman Cinar Cagan
A Study on the Machinability of Environmentally Friendly Turning of Titanium Grade 2 Alloy
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, vol. 146, no. 6, pp. 9–
Süleyman Çınar Çağan, Berat Barış Buldum
A green machining study to investigate the effect of nano-cutting fluid environments on the machinability of Ti6Al4V titanium alloy
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, vol. 237, no. 9, pp. 1841–1853
Süleyman Çınar Çağan, Berat Barış Buldum
Influence of the effect of the ball burnishing process applied to Al 7075-T6 alloy in different nano-aluminum powder-added grease environment on surface quality
Advanced Engineering Science, vol. 1, no. , pp. 20–25
Süleyman Çınar Çağan, Berat Barış Buldum
Machinability investigation of Incoloy 825 in high-speed turning under dry conditions
MATERIA-RIO DE JANEIRO, vol. 26, no. 4, pp. –
Süleyman Çınar Çağan, Berat Barış Buldum
Investigation of surface roughness and chip morphology of aluminum alloy in dry and minimum quantity lubrication machining
Materials Today: Proceedings, vol. 27, no. 27, pp. 1122–1126
Süleyman Çınar Çağan, Bellam Venkatesh, Berat Barış Buldum
An investigation into ball burnishing process of magnesium alloy on CNC lathe using different environments
JOURNAL OF MAGNESIUM AND ALLOYS, vol. 8, no. 4, pp. 1061–1070
Süleyman Çınar Çağan, Iulian Pruncu Catalin, Berat Barış Buldum
Experimental investigation on the ball burnishing of carbon fiber reinforced polymer
Materials and Manufacturing Processes, vol. 34, no. 9, pp. 1062–1067
Süleyman Çınar Çağan, Berat Barış Buldum, İskender Özkul
Chip Morphology in Turning of AZ91D Magnesium Alloy under Different Machining Conditions
Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi, vol. 23, no. 1, pp. 119–125
Süleyman Çınar Çağan, Berat Barış Buldum, İskender Özkul
The design of a rotary-wing unmanned aerial vehicles–payload drop mechanism for fire-fighting services using fire-extinguishing balls
SN Applied Sciences, vol. 1, no. 10, pp. –
Ali Soliaman, Süleyman Çınar Çağan, Berat Barış Buldum
Artificial neural networks in mechanical surface enhancementtechnique for the prediction of surface roughnessand microhardness of magnesium alloy
Bulletin of the Polish Academy of Sciences-Technical Sciences, vol. 67, no. 4, pp. 729–739
Süleyman Çınar Çağan, Mehmet Acı, Berat Barış Buldum, Çiğdem Acı
Effects of ball burnishing on the surface quality of Al 7075 alloy
Materials Testing, vol. 61, no. 11, pp. 1105–1108
Süleyman Çınar Çağan, Berat Barış Buldum
Hafif Metallerde Minimum Miktarda Yağlama (MQL) Sisteminin Kullanımı
El-Cezeri Fen ve Mühendislik Dergisi, vol. 5, no. 2, pp. 582–590
Süleyman Çınar Çağan, Berat Barış Buldum, İskender Özkul
Investigation of the Effect of Different Working Mediums on Turning Al7075-T6 Alloy
International Journal of Engineering Research and Advanced Technology, vol. 4, no. 12, pp. 01–07
Süleyman Çınar Çağan, Berat Barış Buldum
INVESTIGATION OF SURFACE ROUGHNESS AND MICROHARDNESS IN BALL BURNISHING PROCESS OF AZ31B MAGNESIUM ALLOY
Selçuk Üniversitesi Mühendislik, Bilim ve Teknoloji Dergisi, vol. 6, no. 1, pp. 152–161
Berat Barış Buldum
Effect of Ball-burnishing Parameters on Surface Roughness and Surface Hardness of Aluminum Alloy 6013
Materials Testing, vol. 60, no. 4, pp. 418–422
Berat Barış Buldum, Burhan Bayhan
Design study with height adjustable washbasin
International Advanced Researches and Engineering Journal, vol. 2, no. 3, pp. 282–286
Süleyman Çınar Çağan, Berat Barış Buldum, İskender Özkul
Investigation of the Effect of Minimum Quantity Lubrication (MQL) on the Machining of Titanium and its Alloys A Review
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), vol. 7, no. 6, pp. 453–462
Süleyman Çınar Çağan, Berat Barış Buldum
THE OPTIMIZATION OF SURFACE ROUGHNESS OF AZ91D MAGNESIUM ALLOY USING ANOVA IN BALL BURNISHING PROCESS
Turkish Journal of Enginnering, vol. 1, no. 1, pp. 25–31
Berat Barış Buldum, Süleyman Çınar Çağan
Improvement of Surface Roughness using ANOVA for AZ31B Magnesium Alloy with Ball Burnishing Process
International journal of Engineering Research and Technology, vol. 6, no. 9, pp. 216–221
Mustafa Uğurlu, Süleyman Çınar Çağan, Berat Barış Buldum
REGRESSION MODELING OF THE HOLE QUALITIES DURING COLD WORK TOOL STEELS DRILLING, WITH DIFFERENT CHARACTERISTICS DRILL BITS
Turkish Journal of Engineering, vol. 1, no. 2, pp. 52–60
İskender Özkul, Berat Barış Buldum, Adnan Akkurt
Study of Ball Burnishing Process on the Surface Roughness and Microhardness of AZ91D Alloy
EXPERIMENTAL TECHNIQUES, vol. 42, no. 2, pp. 233–241
Berat Barış Buldum, Süleyman Çınar Çağan
ANN surface roughness prediction of AZ91D magnesium alloys in the turning process
Materials Testing, vol. 59, no. 10, pp. 916–920
Berat Barış Buldum, Aydın Şık, Ali Akdağlı, Mustafa Berkan Biçer, Kemal Aldaş, İskender Özkul
Modeling and optimization of CNC milling of AISI 1050 steel by a regression based differential evolution algorithm DEA
Materials Testing, vol. 58, no. 7-8, pp. 632–639
Uğur Eşme, Mustafa Kemal Külekci, Deniz Üstün, Berat Barış Buldum, Yiğit Kazançoğlu, Yigit Kazançoğl...
Using Pd II and Ni II complexes with N N dimethyl N 2 chlorobenzoylthiourea ligand as fuel additives in diesel engine
Fuel, vol. 162, no. , pp. 202–206
Ali Keskin, Ocakoglu Kasım, Kasım Ocakoğlu, Resitoglu İbrahim Aslan, İbrahim Aslan Reşitoğlu, Avsar ...
Cold formability of AISI 1020 steel sheets
Materials Testing, vol. 57, no. 3, pp. 200–204
Mustafa Kemal Külekci, Funda Kahraman, Uğur Eşme, Berat Barış Buldum
Critical analysis of friction stir based manufacturing processes
The International Journal of Advanced Manufacturing Technology, vol. 85, no. 5-8, pp. 1687–1712
Mustafa Kemal Külekci, Uğur Eşme, Berat Barış Buldum
DIEVAR SICAK İŞ TAKIM ÇELİĞİNİN DELİNMESİNDE KESME PARAMETRELERİNİN KESME KUVVETLERİ VE YÜZEY KALİTESİNE ETKİSİNİN REGRESYON ANALİZİYLE MODELLENMESİ
PAJES, vol. 19, no. 1, pp. 1–9
İskender Özkul, Berat Barış Buldum, Adnan Akkurt
Machinabilty Of Sleipner Cold Work Steel with Wire Electro Discharge Machining
International Journal of Electronics Mechanical and Mechatronics Engineering, vol. 2, no. 3, pp. 252–260
İskender Özkul, Berat Barış Buldum, Adnan Akkurt
Investigation of magnesium alloys machinability
International Journal of Electronics Mechanical and Mechatronics Engineering, vol. 2, no. 3, pp. 261–268
Berat Barış Buldum, Aydın Şık, İskender Özkul
Use of Grey Taguchi Method for the Optimization of Oblique Turning Process of AZ91D Magnesium Alloy
Materials Testing, vol. 54, no. 11-12, pp. 779–785
Berat Barış Buldum, Uğur Eşme, Mustafa Kemal Külekci, Aydın Şık, Yiğit Kazançoğlu
Greenhouse Gas GHG Reduction Technologies and Applications in Automotive Industry
Materials Testing, vol. 54, no. 11-12, pp. 807–818
Mustafa Kemal Külekci, Yanpar Tuğba, Uğur Eşme, Berat Barış Buldum
Tarsus Meslek Yüksekokulunda Verilen Öğrenci Danışmanlığı Eğitim Öğretim ve İdari Hizmetlerin Kalitesinin Ölçülmesi ve Sonuçlarının Değerlendirilmesi
1. Uluslararası 5. Ulusal Meslek Yüksekokulları Sempozyumu, vol. , no. , pp. –
Kuddis Büyükakıllı, Cenk Kırıtoğlu, Berat Barış Buldum, İsmail Hakkı Eskidemir, Mustafa Kemal Külekc...
Tribological properties of brake friction materials containing ulexite and borax
Bor Dergisi, vol. 3, no. 2, pp. 126–131
Banu Sugözü, Berat Barış Buldum, İlker Sugözü
Kolemanit ve Boraks Takviyeli Fren Balatalarının Sürtünme Performansı
El-Cezeri Fen ve Mühendislik Dergisi, vol. 5, no. 2, pp. 635–644
Gökhan Başar, Berat Barış Buldum, İlker Sugözü
MOBİLYA ENDÜSTRİSİ İÇİN YENİ KANEPE YATAK MEKANİZMASI SİSTEMİ
Mehmet Akif Ersoy Üniversitesi Uygulamalı Bilimler Dergisi, vol. 2, no. 1, pp. 34–41
Hüseyin Mutlu, Burak Emre Yapanmış, Berat Barış Buldum
Dievar Sıcak İş Takım Çeliğinin Delinmesinde Kesme Parametrelerinin Kesme Kuvvetleri Ve Yüzey Kalitesine Etkisinin Regresyon Analiziyle Modellenmesi
Pamukkale University Journal of Engineering Sciences, vol. 19, no. 1, pp. 1–9
İskender Özkul, Berat Barış Buldum, Adnan Akkurt
Sıcak İş Takım Çeliklerinden Dıevar Takım Çeliğinin Tel Erozyon İle İşlenebilirliniğinin Araştırılması
Makine Teknolojileri Elektronik Dergisi, vol. 9, no. 4, pp. 31–44
İskender Özkul, Ulvi Şeker, Berat Barış Buldum, Adnan Akkurt
Yenilenebilir Enerji Kaynaklarından Güneş Enerjisinden Temiz Enerji Elde Etme Uygulamaları ve İktisadi Faydaları
Mali Ufuklar, vol. 2, no. 1, pp. 76–81
Berat Barış Buldum
