The production of graphene by direct liquid phase exfoliation of graphite at moderate sonication power by using low boiling liquid media: The effect of liquid media on yield …
Ceramics International, vol. 47, no. 1, pp. 521–533
Mükremin Tekeli, Ömer Güler, Mustafa Taşkın, Seval Hale Güler, Is Yahia
The production of graphene by direct liquid phase exfoliation of graphite at moderate sonication power by using low boiling liquid media: The effect of liquid media on yield and optimization
CERAMICS INTERNATIONAL, vol. 47, no. 1, pp. 521–533
Ömer Güler, Mükremin Tekeli, Mustafa Taşkın, Seval Hale Güler, İbrahim S. Yahia, İbrahim Yahia
The effect of equal-channel angular pressing (ECAP) on the properties of graphene reinforced aluminium matrix composites
JOURNAL OF COMPOSITE MATERIALS, vol. 55, no. 13, pp. 1749–1768
Ömer Güler, Nihal Bağcı, Seval Hale Güler, Canan Aksu Canbay, Hasan Safa, Taha Alper Yılmaz, Mustafa...
Variation with graphene oxide doping of structural, optical, dielectric and thermal properties of BaCO3:ZnO nanocrystals synthesized by solgel combustion method
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, vol. 139, no. 6, pp. 3833–3841
Handan Aydın, Mustafa Taşkın, Cihat Aydın, Fethi Dağdelen, Ömer Kayğılı, Niyazi Bulut, Ayhan Orhan
The effect of graphene oxide on structural, opto-electrical and thermal properties of manganese sillenite (Bi12MnO20) nano-powders
Journal of Thermal Analysis and Calorimetry, vol. 139, no. 6, pp. 3821–3832
Cihat Aydın, Mustafa Taşkın, Handan Aydın
The production of graphene–boron nitride nanosheet heterostructures via liquid phase exfoliation assisted by a milling process
Bulletin of Materials Science, vol. 42, no. 1, pp. 7–13
Ömer Güler, Seval Hale Güler, Mustafa Taşkın
A Novel Study: The Effect of Graphene Oxide on the Morphology, Crystal Structure, Optical and Electrical Properties of Lanthanum Ferrite Based Nano Electroceramics Synthesized by Hydrothermal Method
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, vol. 19, no. 5, pp. 2547–2555
Cihat Aydın, Handan Aydın, Mustafa Taşkın, Fahrettin Yakuphanoğlu
The Effect of Graphene Oxide on the Morphology, Crystal Structure, Optical and Electrical Properties of Lanthanum Ferrite Based Nano Electroceramics Synthesized by Hydrothermal Method.
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, vol. , no. , pp. –
Mustafa Taşkın, Cihat Aydın, Handan Aydın, Fahrettin Yakuphanoğlu
Low-temperature Synthesis and Characterization of Bismuth Ferrite/Graphene Oxide Nano electroceramics by the Hydrothermal Method
Journal of Physical Chemistry and Functional Materials, vol. 1, no. 1, pp. 111–125
Cihat Aydın, Handan Aydın, Mustafa Taşkın
The Investigation of Microstructures of Composites Bonded By Diffusion Bonding Using Ag Interlayer
Ciência e Técnica Vitivinícola, vol. 33, no. 2, pp. 146–160
Haluk Kejanlı, Nida Katı, Uğur Çalıgülü, Mustafa Taşkın
The Fatigue Strength of AISI 430 304 Stainless SteelsWelded by CO2 Laser Beam Welding
Metallofizika i Noveishie Tekhnologii, vol. 37, no. 6, pp. 839–852
Uğur Çalıgülü, Mustafa Türkmen, Alpay Özer, Mustafa Taşkın, Melika Özer
The Effects of Welding Speed on Microstructure and Mechanical Properties of Dissimilar Welded Joints by CO2 Laser Welding
Materials Testing, vol. 1, no. 56, pp. 24–31
Mustafa Taşkın
X-ray radiography of Ti6Al4V welded by plasma tungsten arc (PTA) welding
Materials Testing, vol. , no. , pp. –
Halil Dikbaş, Uğur Çalıgülü, Mustafa Türkmen, Mustafa Taşkın
Non destructive Testing X Ray Radiographic of the Ti6Al4V Alloy Welded by Plasma Transfer Arc PTA Welding
Materials Testing, vol. 3, no. 55, pp. 197–202
Halil Dikbaş, Uğur Çalıgülü, Mustafa Taşkın, Mustafa Türkmen
Interface characterization of CO2 laser welded austenitic stainless steel and low carbon steel couple
Industrial Lubrication and Tribology, vol. 64, no. 4, pp. 196–207
Caligulu Ugur, Taskin Mustafa, Kejanli Haluk, Orhan Ayhan
Microstructural characteristic of dissimilar welded components (AISI 430 ferritic-AISI 304 Austenitic Stainless Steels) by CO 2 Laser Beam Welding (LBW)
Gazi University journal of science, vol. 25, no. 1, pp. 35–52
Uğur Çalıgülü, Halil Dikbaş, Mustafa Taşkın
X Ray Tests of AISI 430 and 304 Stainless Steels and AISI 1010 Low Carbon Steel Welded by CO2 Laser Beam Welding
MP-Materials Testing-Materials and Components Technology and Application, vol. 53, no. 11, pp. 741–747
Taskin Mustafa, Caligulu Ugur, Turkmen Mustafa
The Optimisation of Adhesive Wear Behavior of AlMgSi SiC Aluminium Composite with Taguchi Method
Journal of Basic and Applied Sciences, vol. 5, no. 9, pp. 1584–1590
Ali Kaya Gür, Uğur Çalıgülü, Mustafa Taşkın
An investigation into the effect of welding current on the plasma arc welding of pure titanium
Metallic Materials (Kovove Materialy), vol. 48, no. 3, pp. –
Kahraman Nizamettin, Taskın Mustafa, Gulenc Behçet, Durgutlu, Ahmet
Artificial neural network ANN approach to prediction of diffusion bonding behavior shear strength of Ni Ti alloys manufactured by powder metalurgy method Mathematical and Computational Applications
Mathematical and Computational Applications, vol. 13, no. , pp. 183–191
Mustafa Taşkın, Halil Dikbaş, Uğur Çalıgülü
Transient liquid phase tlp diffusion bonding of Ti45Ni49Cu6 P M components using Cu interlayer
The International Journal of Advanced Manufacturing Technology, vol. 44, no. 7, pp. 695–699
Kejanli Haluk, Taşkin Mustafa, Kolukisa Sedat, Topuz Polat
The Effect of Welding Speed on the Laser Welding of AISI 430 Ferritic Stainless—AISI 1010 Low-Carbon Steel
Practical Metallography, vol. 46, no. 11, pp. 598–608
Mustafa Taşkın, Uğur Çalıgülü
Application of ANN in the prediction of the pore concentration of aluminum metal foams manufactured by powder metallurgy methods
The International Journal of Advanced Manufacturing Technology, vol. 39, no. 3, pp. 251–256
Ozan Sermin, Taskin Mustafa, Kolukisa Sedat, Ozerdem Mehmet Sirac
Modeling adhesive wear resistance of Al Si Mg SiCp PM compacts fabricated by hot pressing process by means of ANN
The International Journal of Advanced Manufacturing Technology, vol. 37, no. 7, pp. 715–721
Taskin Mustafa, Caligulu Uğur, Gur Ali Kaya
Artificial Neural Network (ANN) Approach to Prediction of Diffusion Bonding Behavior (Shear Strength) of Ni-Ti Alloys Manufactured by Powder Metalurgy Method
Mathematical and Computational Applications, vol. 13, no. 3, pp. 183–191
Mustafa Taşkın, Halil Dikbaş, Uğur Çalıgülü
The effect of the process temperature on the bondability in diffusion bonding of AISI 430 with nodular cast iron
Practical Metallography, vol. 43, no. 6, pp. 293–305
Taskin Mustafa, Ozan Sermin, Kolukisa Sedat
Diffusion bonding of fine grained high carbon steels in the superplasticity temperature range
Indian Journal of Engineering & Materials Sciences, vol. , no. 13, pp. 368–384
Taşkın Mustafa, Orhan Nuri, Ozan Sermin
The effect of the process temperature on the bondability in diffusion bonding of ferritic AISI 430 with martensitic AISI 420 stainless steels
Practical Metallography, vol. 43, no. 5, pp. 252–261
Kolukisa Sedat, Taskin Mustafa, Ozan Sermin
Modelling of microhardness values by means of artificial neural networks of Al SiCp metal matrix composite material couples processed with diffusion method
Mathematical and Computational Applications, vol. 11, no. 3, pp. 163–172
Mustafa Taşkın, Uğur Çalıgülü
The effect of the process temperature on the bondability in transient liquid phase tlp diffusion bonding of AISI 430 ferritic stainless steel with nodular spheroid cast iron using a copper interlayer
Practical Metallography 43, vol. 43, no. 11, pp. 575–585
Ozan Sermin, Taskin Mustafa, Kolukisa Sedat
Metalik biyomalzemeler ve biyouyum
Doğu Anadolu Bölgesi Araştırmaları, vol. 2, no. 2, pp. 106–113
Ali Kaya Gür, Mustafa Taşkın
Investigation of The Fatigue Behavior of Gyrocopter Propellers Produced From 6061 T6 Aluminium Alloy
Journal of Aviation, vol. 8, no. 3, pp. 192–197
Ahmet Özer Öz, Ercüment Türkoğlu, Umut Önen, Mustafa Taşkın
Production of Nanostructured Fasteners with High Shear and Fatigue Strength for Using in Aircraft Components
Journal of Aviation, vol. 7, no. 2, pp. 165–170
Kazım Buğra Gürbüz, Mustafa Taşkın
The effects of high weldings speed on microstructure and mechanical properties of dissimilar components AISI 430 AISI 304 welded by CO2 laser beam welding
E-Journal of New World Sciences Academy, vol. 5, no. , pp. 160–177
Uğur Çalıgülü, Halil Dikbaş, Mustafa Taşkın
AISI 430/1010 Çelik Çiftinin Lazer Kaynağında Kaynak Gücünün Birleşmeye Etkisi
Firat University Journal of Engineering, vol. 21, no. 1, pp. 11–22
Mustafa Taşkın, Uğur Çalıgülü
The Investigation of Lap Shear Test Values In Terms of Temperature Duration and Interlayer on The Diffusion Bonding of Ni Ti Cu Composites Manufactured by P M Method According to Statistics
E-Journal of New World Sciences Academy, vol. , no. , pp. 109–119
Haluk Kejanlı, Uğur Çalıgülü, Mustafa Taşkın
Ti45 0Ni49 6Cu5 4 Kompozitinin Cu ve Ni Aratabaka Kullanılarak Difüzyon Kaynağı ile Birleştirilmesinde Kaynak Sıcaklığının ve Süresinin Bağlantı Karakteristiği Üzerine Etkisi
Makine Teknolojileri Elektronik Dergisi, vol. , no. , pp. 1–9
Haluk Kejanlı, Mustafa Taşkın, Uğur Çalıgülü
Artificial Neural Network ANN Approach The Prediction Of Diffusion Bonding Behavior Shear Strength Of Ni Ti Cu Alloys Manufactured By Powder Metallurgy Method
Doğu Anadolu Bölgesi Araştırmaları Dergisi, vol. 6, no. , pp. 75–83
Uğur Çalıgülü, Mustafa Taşkın
TM Yöntemiyle Üretilmiş Ni Ti Cu Alaşımlarının TLP Difüzyon Kaynağında Ni ve Cu Folyo Arasındaki Mikrosertlik Değerlerinin İstatistikî Olarak İncelenmesi
Fırat Üniversitesi Mühendislik Bilimleri Dergisi, vol. , no. , pp. 379–388
Mustafa Taşkın, Haluk Kejanlı, Uğur Çalıgülü
Toz Metalurjisi Yöntemiyle Üretilmiş Ni Ti Kompozitinin Difüzyon Kaynağında Sıcaklığın Birleşme Üzerindeki Etkisinin İncelenmesi
Makine Teknolojileri Elektronik Dergisi, vol. , no. , pp. 1–6
Halil Dikbaş, Uğur Çalıgülü, Mustafa Taşkın
TOZ METALURJİSİ YÖNTEMİYLE ÜRETİLMİŞ Ni-Ti-Cu KOMPOZİTLERİN Ni ve Cu ARATABAKA KULLANILARAK DİFÜZYON KAYNAĞI İLE BİRLEŞTİRİLMESİNDE KAYNAK SICAKLIĞININ BAĞLANTI KARAKTERİSTİĞİ ÜZERİNE ETKİSİ
e-Journal of New World Sciences Academy (NEWWSA), vol. , no. , pp. 556–568
Haluk Kejanlı, Mustafa Taşkın, Uğur Çalıgülü
Artificial neural network ANN approach to prediction of diffusion bonding behavior shear strength of SiCp reinforced aluminium metal matrix composites
e- Journal of Yasar University, vol. 11, no. , pp. 1811–1825
Mustafa Taşkın, Uğur Çalıgülü, Halil Dikbaş
Sıcak Presleme Yöntemiyle Üretilmiş AlSiMg SiCp Takviyeli Kompozitlerin Difüzyon Kaynağında Sürenin Birleşme Üzerindeki Etkisinin Araştırılması
Fırat Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, vol. 18, no. , pp. 437–443
Mustafa Taşkın, Uğur Çalıgülü, Halil Dikbaş
TM Yöntemiyle Üretilmiş Nitinol Alaşımının Difüzyon Kaynağında Sürenin Birleşme Üzerindeki Etkisinin İncelenmesi
Metal Makine Dergisi, vol. , no. , pp. 428–431
Mustafa Taşkın, Halil Dikbaş, Uğur Çalıgülü
Sıcak Presleme Yöntemiyle Üretilmiş AlSiMg SiCp Takviyeli Kompozitlerin Difüzyon Kaynağında Basıncın Birleşme Üzerindeki Etkisinin Araştırılması
Metal Makine Dergisi, vol. , no. , pp. 526–530
Uğur Çalıgülü, Mustafa Taşkın